Technical Documentation & Product Data

New: Safety Data Sheets & Factory Inspection Reports
Full 16-section SDS provisions, factory inspection criteria and TDS specifications for all 93 models — now published in English, Russian and Spanish.
Open the technical library →
Guangzhou FanChu Lubricant Technology · Since 2005

Technical Documentation & Product Data

Verified technical specifications for our complete industrial lubricant portfolio. Every formulation is backed by a product data sheet (TDS), a 16-section safety data sheet (SDS / MSDS) and a factory inspection report (COA), tested to GB/T, SH/T, ISO and OECD methods.

93Product models
21Product series
548Verified parameters
ISO 9001 / 14001 / 45001Certified
TDS

Product Data Sheet

Formulation overview, typical physical and chemical properties, recommended dilution ratios, application scope, usage and storage guidance for each model.

SDS / MSDS

Safety Data Sheet (16 sections)

Full 16-section chemical safety documentation covering composition, hazard identification, first aid, handling, exposure control, transport and regulatory information.

COA

Factory Inspection Report

Batch-level factory test report with measured values for appearance, viscosity, flash point, pH, corrosion and rust-prevention performance against GB/T and SH/T methods.

Showing 93 products

No products match your search.

Emulsified Oils

Water-miscible emulsifiable metalworking fluids for cast iron, carbon steel and aluminum alloy machining, formulated for long sump life and reliable in-process corrosion protection.

SW-013

SW-013 Rust-Preventive Emulsified Oil

Nitrite- and phenol-free rust-preventive emulsifiable fluid for cast iron and carbon steel. Stable, long sump life with superior corrosion protection, cooling and lubricity.

TDSSDS / MSDSCOA
View verified technical data (8 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Brown-red clear liquid
Appearance, 5%wt.Dilution Visual Milky opaque liquid
pH Value, 5%wt. pH meter 9.2-9.6
Emulsion Stability@15-35°C,24h, Soap SH/0365 <= 0.5
Emulsion Stability@15-35°C,24h, Oil SH/0365 None
Emulsion Rust Prevention@35±2°C, Cast Iron Chips, Single Chip, 24h GB/T6144 Grade A
Emulsion Rust Prevention@35±2°C, Cast Iron Chips, Stacked Chips, 8h GB/T6144 Grade A
Emulsion Corrosion Test@55±2°C, Full Immersion, Steel Strip, 24h GB/T6144 Grade A
Request TDS / SDS / COA →
SW-014

SW-014 Aluminum Alloy Emulsified Oil

Emulsifiable fluid engineered specifically for aluminum alloys, delivering stable emulsion, strong lubricity and detergency with extended service life.

TDSSDS / MSDSCOA
View verified technical data (8 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Brown-red clear liquid
Appearance, 5%wt.Dilution Visual Milky opaque liquid
pH Value, 5%wt. pH meter 8.8-9.2
Emulsion Stability@15-35°C,24h, Soap SH/0365 <= 0.5
Emulsion Stability@15-35°C,24h, Oil SH/0365 None
Emulsion Corrosion Test@55±2°C, Full Immersion, Steel Strip, 24h SH/0365 Pass
Emulsion Corrosion Test@55±2°C, Full Immersion, Copper Strip, 6h SH/0365 Pass
Emulsion Corrosion Test@55±2°C, Full Immersion, Aluminum Strip, 4h SH/T0365 Pass
Request TDS / SDS / COA →
SW-015

SW-015 Extreme-Pressure Emulsified Oil

Extreme-pressure emulsifiable oil blended with premium emulsifiers, lubricity agents and rust inhibitors for balanced lubrication, cooling, cleaning and anti-rust performance.

TDSSDS / MSDSCOA
View verified technical data (10 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Yellow clear liquid
Appearance, 5%wt.Dilution Visual Uniform emulsion
pH Value, 5%wt. pH meter 8.8-9.2
Refractometer Reading Refractometer > 70
Emulsion Stability@15-35°C,24h, Soap SH/T0365 <= 0.5
Emulsion Stability@15-35°C,24h, Oil SH/T0365 None
Rust Prevention, 5%wt (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Emulsion Corrosion Test@55±2°C, Full Immersion, Steel Strip, 24h GB/T6144 Grade A
Emulsion Corrosion Test@55±2°C, Full Immersion, Copper Strip, 8h GB/T6144 Grade A
Emulsion Corrosion Test@55±2°C, Full Immersion, Aluminum Strip, 8h GB/T6144 Grade A
Request TDS / SDS / COA →
SW-021

SW-021 Tapping Fluid

High-efficiency water-soluble tapping fluid with lubricity additives, non-ferrous corrosion inhibitors and foam suppressants; heavy-metal free.

TDSSDS / MSDSCOA
View verified technical data (9 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Refractometer Reading Refractometer > 70
pH Value, 5%wt. pH meter 8.8-9.2
5%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (55°C±2°C), h Steel strip GB/T6144
Corrosion (55°C±2°C), h Copper GB/T6144
Corrosion (55°C±2°C), h LY12 aluminum GB/T6144
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →

Fully Synthetic Cutting & Grinding Fluids

Mineral-oil-free synthetic coolants engineered for precision grinding, general CNC machining and difficult alloys, with low foam, fast chip settling and clean machine surfaces.

SW-200

SW-200 Magnesium-Aluminum Alloy Cutting Fluid

Full-synthetic water-soluble cutting fluid for magnesium-aluminum alloys. Heavy-metal and nitrite free, with strong lubricity, fast chip settling and excellent cooling.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Refractometer Reading Refractometer 28-30
pH Value, 5%wt. pH meter 8.9-9.3
Rust Prevention, 5%wt (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-210

SW-210 Rust-Preventive Grinding Fluid

Full-synthetic water-soluble grinding fluid built on water-soluble rust inhibitors and anti-wear agents; free of sulphur, phosphorus, chlorine and heavy-metal ions.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Colorless to light-yellow clear liquid
Appearance, 5%wt.Dilution Visual Colorless clear liquid
Refractometer Reading Refractometer 28-30
pH Value, 5%wt. pH meter 8.9-9.3
Rust Prevention, 5%wt (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Request TDS / SDS / COA →
SW-240KN

SW-240KN Precision Grinding Fluid

Full-synthetic water-soluble precision grinding fluid with lubricity and rust inhibitors; free of heavy metals, sodium nitrite and phenols.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Clear liquid
Appearance, 5%wt.Dilution Visual Colorless clear liquid
Refractometer Reading Refractometer 41-42
pH Value, 5%wt. pH meter 8.9-9.3
Rust Prevention, 5%wt (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-242

SW-242 Aluminum Alloy Cutting Fluid

Full-synthetic water-soluble cutting fluid optimized for aluminum alloys, providing excellent lubricity and improved workpiece surface finish.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Colorless to light-yellow clear liquid
Refractometer Reading Refractometer 40-44
pH Value, 5%wt. pH meter 7.5-8.0
10%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (6061 Aluminum, 8h) GB/T6144 Grade A
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Request TDS / SDS / COA →
SW-250

SW-250 General-Purpose Cutting Fluid

Full-synthetic water-soluble cutting fluid free of sulphur, phosphorus and chlorine additives, with balanced lubrication, cooling, cleaning and rust protection.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Yellow clear liquid
Appearance, 5%wt.Dilution Visual Clear liquid
Refractometer Reading Refractometer 35-38
pH Value, 5%wt. pH meter 8.8-9.3
Rust Prevention, 5%wt (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Defoaming Rate, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-258

SW-258 Rust-Preventive Cutting Fluid

Premium water-soluble cutting fluid formulated for cast iron, alloy steel and carbon steel with advanced lubricity and rust-inhibitor packages.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Bright clear liquid
Appearance, 5%wt.Dilution pH meter Clear liquid
Refractometer Reading Refractometer 29-31
pH Value, 5%wt. GB/T 6144 8.8-9.3
3%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Request TDS / SDS / COA →
SW-280

SW-280 General-Purpose Cutting Fluid

High-efficiency full-synthetic water-soluble cutting fluid with lubricity, rust inhibitors and foam suppressants; free of heavy metals, sodium nitrite and phenols.

TDSSDS / MSDSCOA
View verified technical data (8 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Translucent to clear liquid
Appearance, 5%wt.Dilution Visual Translucent liquid
Refractometer Reading Refractometer 28-30
pH Value, 5%wt. pH meter 8.8-9.2
Rust Prevention (5%, 18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion, (LY12 Aluminum, 55°C±2°C, 8h) GB/T 6144 Grade A, no corrosion
Corrosion, (Copper, 55°C±2°C, 8h) GB/T 6144 Grade A, no corrosion
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-285

SW-285 Glass Grinding Fluid

Full-synthetic grinding fluid for glass, delivering lubrication, cooling, cleaning and anti-redeposition performance that reduces edge chipping, scratches and cracking.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Colorless clear liquid
Appearance, 5%wt.Dilution Visual Colorless clear liquid
pH Value, 5%wt. pH meter 8.5-9.0
Rust Prevention, (Cast Iron, 35°C±2°C, RH>95%; Single Chip24h) GB/T 6144 Grade A
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-400

SW-400 Cemented Carbide Grinding Fluid

New-generation eco-friendly full-synthetic grinding fluid purpose-built for tungsten carbide and hard-metal grinding applications.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Clear liquid
Appearance, 5%wt.Dilution Visual Clear liquid
pH Value, 5%wt. SH/T 0298 8.8-9.2
Rust Prevention, (Cast Iron, 35°C±2°C, RH>95%; Single Chip24h, Stacked Chips8h) GB/T 6144 Grade A
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →

Stamping & Deep-Drawing Forming Oils

Process lubricants for severe metal forming, deep drawing and stamping, delivering extreme-pressure anti-weld performance and die protection on stainless and carbon steel.

SD-201

SD-201 General-Purpose Forming Oil

Mineral-oil-based process lubricant for metal press forming and deep drawing, fortified with multiple extreme-pressure additives.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Brown-yellow clear liquid
Flash Point, °C GB/T261 >180
Kinematic Viscosity@40°C, cSt GB/T265 80-120
Weld Load (PD), N GB/T3142 > 4900
Mechanical Impurities GB/T511 None
Water Content GB/T260 Trace
Request TDS / SDS / COA →
SD-202

SD-202 Stainless Steel Forming Oil

Process lubricant for severe press forming and deep drawing with outstanding extreme-pressure anti-weld performance, designed for stainless steel.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Light-yellow to yellow clear liquid
Flash Point, °C GB/T267 > 200
Kinematic Viscosity@40°C, cSt GB/T265 350-500
Weld Load (PD), N GB3142 > 6076
Water Content GB/T260 Trace
Mechanical Impurities GB/T511 None
Request TDS / SDS / COA →
SD-320

SD-320 Rust-Preventive Stamping Oil

Rust-preventive stamping lubricant based on mineral oil and a multi-additive package for press forming operations.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Yellow clear liquid
Flash Point, °C GB/T261 >180
Kinematic Viscosity@40°C, cSt GB/T265 30-40
Weld Load (PD), N GB3142 >3920
Request TDS / SDS / COA →
SD-920G

SD-920G Water-Based Drawing Paste

Water-soluble drawing paste engineered for demanding stainless steel sheet deep drawing, with strong lubricity and extreme-pressure performance.

TDSSDS / MSDSCOA
View verified technical data (3 parameters)
Test Item Test Method Specification
Appearance Visual White paste
Dilution Appearance, 5%wt. Visual Emulsion
pH Value pH meter 8.0-9.0
Request TDS / SDS / COA →
SD-920

SD-920 Water-Based Stamping & Drawing Oil

Water-based stamping and drawing fluid with lubricity, EP and rust inhibitors; free of heavy metals, sodium nitrite and phenols.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
pH Value, 5%wt. pH meter 8.8-9.2
Rust Prevention, (Cast Iron, 35°C±2°C, Single Chip24h, Stacked Chips8h) GB/T 6144 Grade A
Corrosion (55°C±2°C), h Steel strip GB/T6144
Corrosion (55°C±2°C), h Copper GB/T6144
Corrosion (55°C±2°C), h LY12 aluminum GB/T6144
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Request TDS / SDS / COA →

Semi-Synthetic & Microemulsion Fluids

Low-oil semi-synthetic and microemulsion coolants balancing lubricity, detergency and biological stability for aluminum wheels, magnesium alloys and mixed-metal cells.

SW-020

SW-020 Aluminum Wheel Specialty Cutting Fluid

Water-miscible cutting fluid for aluminum wheel hubs with stable emulsion, bacterial resistance, low skin irritation and long service life; nitrite free.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Brown-red clear liquid
Foam Tendency (mL/10min) GB/T6144 <= 2
pH Value, 5%wt. pH meter 8.4-8.8
Nitrite Ion Content Nitrite test strip None
Request TDS / SDS / COA →
SW-030

SW-030 Magnesium Alloy Specialty Cutting Fluid

Microemulsion water-soluble cutting fluid for magnesium alloys with lubricity, rust and non-ferrous corrosion inhibitors; heavy-metal and nitrite free.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Yellow clear liquid
Appearance, 5%wt.Dilution Visual Microemulsion
pH Value, 5%wt. pH meter 9.3-10.3
5%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Hard-Water Tolerance, 3000ppm JB/T7453 No flocculation or precipitate
Magnesium AlloyCorrosion (AZ31B Magnesium, 55°C, 8h) GB/T 6144 Grade A
Request TDS / SDS / COA →
SW-380

SW-380 Semi-Synthetic General-Purpose Cutting Fluid

High-efficiency semi-synthetic water-soluble cutting fluid with a full lubricity, rust-inhibitor, non-ferrous passivator and foam-control package.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Appearance Visual Amber clear liquid
Refractometer Reading Refractometer 45-50
pH Value, 5%wt. pH meter 8.8-9.2
Rust Prevention (Cast Iron, 35°C±2°C, RH>95%Single Chip24h, Stacked Chips8h) GB/T 6144 Grade A
Corrosion (Copper, 55°C±2°C, 8h) GB/T 6144 Grade A
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-F3

SW-F3 High-Performance Microemulsion Cutting Fluid

Premium water-soluble microemulsion cutting fluid with balanced lubricity, rust protection, non-ferrous inhibition and foam suppression.

TDSSDS / MSDSCOA
View verified technical data (9 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
pH Value, 5%wt. pH meter 8.8-9.2
Refractometer Reading Refractometer > 70
Rust Prevention, 5%wt (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (55°C±2°C), h Steel strip GB/T6144
Corrosion (55°C±2°C), h Copper GB/T6144
Corrosion (55°C±2°C), h LY12 aluminum GB/T6144
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-F5

SW-F5 General-Purpose Microemulsion Cutting Fluid

High-performance general-purpose water-soluble microemulsion cutting fluid for mixed-metal machining cells.

TDSSDS / MSDSCOA
View verified technical data (8 parameters)
Test Item Test Method Specification
Appearance Visual Yellow clear liquid
pH Value, 5%wt. pH meter 8.8-9.2
Refractometer Reading Refractometer > 71
5%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (55°C±2°C), h Steel strip GB/T6144
Corrosion (55°C±2°C), h Copper GB/T6144
Corrosion (55°C±2°C), h LY12 aluminum GB/T6144
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Request TDS / SDS / COA →
SW-F6-55

SW-F6-55 Semi-Synthetic Cutting Fluid

Water-soluble semi-synthetic cutting fluid built on selected lubricity, EP and rust-inhibitor additives; free of heavy metals, sodium nitrite and phenols.

TDSSDS / MSDS
View verified technical data (9 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
pH Value, 5%wt. pH meter 8.8-9.2
Refractometer Reading Refractometer 55-57
5%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (55°C±2°C), h Steel strip GB/T6144
Corrosion (55°C±2°C), h Copper GB/T6144
Corrosion (55°C±2°C), h LY12 aluminum GB/T6144
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-H1

SW-H1 Odor-Control Cutting Fluid

Formaldehyde-free, low-odor premium microemulsion cutting fluid with selected lubricity, EP and rust-inhibitor additives.

TDSSDS / MSDSCOA
View verified technical data (8 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
pH Value, 5%wt. pH meter 9.0-9.5
5%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (55°C±2°C), h Steel strip GB/T6144
Corrosion (55°C±2°C), h Copper GB/T6144
Corrosion (55°C±2°C), h LY12 aluminum GB/T6144
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →

Heat-Transfer Oils

Mineral, semi-synthetic and fully synthetic heat-transfer fluids with high thermal-oxidative stability and anti-coking performance for closed-loop industrial heating systems.

TH-300

TH-300 Series Mineral Heat-Transfer Oil

Mineral heat-transfer oil refined by a special process with high-temperature anti-oxidant, anti-scale and anti-coking additives.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 27-37
Flash Point, °C GB/T261 > 200
Pour Point, °C GB/T261 < -9
Corrosion Test, Copper@100°C, 3h GB/T5096 Pass
Request TDS / SDS / COA →
TH-320

TH-320 Series Synthetic Heat-Transfer Oil

Synthetic heat-transfer oil with high-temperature anti-oxidant, anti-scale and anti-coking additives for chemical, agrochemical and textile heating systems.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 27-37
Pour Point, °C GB/T261 < -9
Corrosion Test, Copper@100°C, 3h GB/T5096 Pass
Request TDS / SDS / COA →
TH-340

TH-340 Series Fully Synthetic High-Efficiency Heat-Transfer Oil

Fully synthetic high-efficiency heat-transfer fluid based on synthetic polyester with premium high-temperature additives for demanding closed-loop systems.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 20-35
Viscosity Index GB/T2541 > 95
Flash Point, °C GB/T261 >200
Maximum Service Temperature, °C GB/T23800 340
Corrosion Test, Copper@100°C, 3h SH/T0195 Pass
Request TDS / SDS / COA →

Slideway & Spindle Oils

Precision slideway and spindle lubricants providing stick-slip-free positioning, high viscosity index and anti-wear protection for machine tools.

FD

FD Machine-Tool Spindle Oil

Machine-tool spindle oil from high-quality low-viscosity base stocks with detergent, dispersant, anti-wear, anti-oxidant, anti-corrosion and anti-foam additives.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 1.98- 2.42
Cleveland Open-Cup Flash Point, °C GB/T3536 > 70
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Request TDS / SDS / COA →
G

G-Series Slideway Oil

Slideway oil based on deeply refined high-viscosity-index base stocks with anti-oxidant, anti-wear and rust inhibitors for precision machine tools.

TDSSDS / MSDS
View verified technical data (7 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 28.8-35.2
Viscosity Index GB/T1995 > 90
Cleveland Open-Cup Flash Point, °C GB/T3536 > 175
Pour Point, °C GB/T3535 < -6
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Request TDS / SDS / COA →

Industrial Cleaners

Aqueous, solvent and specialty cleaners for degreasing, wax removal, derusting, ultrasonic and low-foam spray washing of metal components.

C-100

C-100 Wax Remover

Water-based wax remover compounded from surfactants and builders with excellent dispersing, penetrating, cleaning and rust-inhibiting performance.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Yellow clear liquid
pH Value, 5%wt. pH meter 9.6-10.2
Cleaning Efficiency, % JB/T 4323 >= 98
5%Rust Prevention (Cast Iron Chips, 18°C-28°C, 2h) JB/T 9189-2016 Grade 0
Request TDS / SDS / COA →
C-300AL

C-300AL Aluminum Alloy Cleaner

Water-based cleaner with surfactants, builders and specialty corrosion inhibitors for aluminum alloys; powerful penetration and cleaning.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Clear liquid
Appearance, 5%wt.Dilution Visual Clear liquid
pH Value, 5%wt. pH meter 8.6-9.0
Rust Prevention, 5%wt (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
AluminumCorrosion (LY12 Aluminum, 55°C±2°C, 8h) GB/T 6144 Grade A
Request TDS / SDS / COA →
C-300L

C-300L Low-Foam Spray Cleaner

Low-foam spray cleaner built on premium low-foam surfactants, builders and penetrants, purpose-made for pressure-spray industrial washing machines.

TDSSDS / MSDSCOA
Request TDS / SDS / COA →
C-301

C-301 Metal Cleaner

Water-based metal cleaner compounded from surfactants and builders with strong dispersing, penetrating, cleaning and rust-inhibiting performance.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Yellow clear liquid
pH Value, 5%wt. pH meter 9.6-10.2
Cleaning Efficiency, % JB/T 4323 >= 98
5%Rust Prevention (Cast Iron Chips, 18°C-28°C, 2h) JB/T 9189-2016 Grade 0
Request TDS / SDS / COA →
C-305

C-305 Degreasing Powder

Water-based degreasing powder with surfactants, builders and specialty inhibitors for powerful penetration and oil removal.

TDSSDS / MSDSCOA
View verified technical data (3 parameters)
Test Item Test Method Specification
Appearance Visual White to light-yellow powder
pH Value, 5%wt. pH meter 8.5-9.5
Cleaning Efficiency, % JB/T 4323 >= 98
Request TDS / SDS / COA →
C-40

C-40 Ultrasonic Cleaner

Water-based ultrasonic cleaner compounded from surfactants and builders with strong penetrating, cleaning and rust-inhibiting performance.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Yellow clear liquid
Appearance, 5%wt.Dilution Visual Clear liquid
pH Value, 5%wt. pH meter 9.50-10.50
Rust Prevention (5%, 18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (90°C±2°C, 2h, 45# Steel) HB5226 Grade 0
Cleaning Efficiency Test (45# Steel, 70°C±2°C, Immersion3min, Agitated Wash4min) HB5226 No visible oil film or residue
Request TDS / SDS / COA →
C-400

C-400 Rust Remover

Specialty liquid rust remover that dissolves oxide scale and carbon deposits while inhibiting attack on the base metal.

TDSSDS / MSDSCOA
Request TDS / SDS / COA →
Q-100

Q-100 Grinding Cleaner

Water-soluble polishing and lapping fluid free of sulphur, phosphorus and chlorine, delivering high surface gloss with good degreasing.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
5%wt.Dilution Appearance Visual Clear to translucent
pH Value, 5%wt. pH meter 2-4
Solubility - Fully water-soluble
Request TDS / SDS / COA →
NR-100

NR-100 Fire-Resistant Cleaner

Fast-drying solvent cleaner with no flash point and no fire hazard, offering moderate solvency and excellent removal of oils and greases.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Colorless clear liquid
Flash Point, °C GB/T3536 No flash point
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →

Industrial Gear Oils

Medium- and heavy-duty industrial gear lubricants with extreme-pressure, anti-oxidation, demulsibility and thermal stability for reducers and circulating systems.

CKD

CKD Heavy-Duty Industrial Gear Oil

Heavy-duty industrial gear oil with strong extreme-pressure anti-wear, oxidation, corrosion and demulsibility performance; reduces power loss and extends oil drain intervals.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 61.2-74.8
Appearance Visual Clear liquid
Flash Point, °C GB/T3536 > 180
Viscosity Index GB/T2541 > 90
Pour Point, °C GB/T3535 < -12
Weld Load (PD), N GB/T3142 >= 2450
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →
L-CKC

L-CKC Medium-Duty Industrial Gear Oil

Medium-duty industrial gear oil with excellent EP anti-wear, oxidation stability, demulsibility and thermal stability for light-to-medium duty reducers and circulating systems.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 28.8- 35.2
Flash Point, °C GB/T3536 > 180
Viscosity Index GB/T2541 > 90
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →
Worm

Worm Gear Oil

Worm gear oil from deeply refined base stocks with excellent water separation and oxidation stability for power station and heavy circulation systems.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 198-242
Cleveland Open-Cup Flash Point, °C GB/T3536 > 200
Viscosity Index GB/T1995 > 90
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Pour Point, °C GB/T3535 <= -6
Request TDS / SDS / COA →

Anti-Wear & Fire-Resistant Hydraulic Fluids

Ashless anti-wear, low-temperature and fire-resistant hydraulic fluids for industrial, marine, mobile and continuous-casting hydraulic systems.

HG

HG Series Alcohol-Type Fire-Resistant Hydraulic Fluid

Glycol-based fire-resistant hydraulic fluid with high-performance anti-wear and anti-foam additives for systems with occasional open-flame exposure.

TDSSDS / MSDS
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Red clear liquid
Kinematic Viscosity (40°C), mm²/S GB/T265 41.4-50.6
pH Value pH meter 8.0-11.0
Pour Point, °C GB/T3535 < -30
Request TDS / SDS / COA →
HM

HM Series Ashless Anti-Wear Hydraulic Oil

Ashless anti-wear hydraulic oil from deeply refined high-VI base stocks for industrial, marine and mobile hydraulic systems.

TDSSDS / MSDS
View verified technical data (7 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 28.8-35.2
Viscosity Index GB/T1995 > 95
Cleveland Open-Cup Flash Point, °C GB/T3536 > 175
Pour Point, °C GB/T3535 < -15
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Request TDS / SDS / COA →
HP

HP Series Synthetic Ester Fire-Resistant Hydraulic Fluid

Synthetic ester fire-resistant hydraulic fluid with friction modifiers, anti-oxidants and rust inhibitors for continuous-casting hydraulic systems in steel plants.

TDSSDS / MSDS
View verified technical data (8 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 41.4-50.6
Viscosity Index GB/T1995 > 180
Cleveland Open-Cup Flash Point, °C GB/T3536 > 280
Pour Point, °C GB/T3535 < -27
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Request TDS / SDS / COA →
HV

HV Series Low-Temperature Hydraulic Oil

Low-temperature hydraulic oil from deeply refined high-VI base stocks with friction modifiers and anti-oxidants for excellent cold-flow performance.

TDSSDS / MSDS
View verified technical data (7 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 13.5-16.5
Viscosity Index GB/T1995 > 130
Cleveland Open-Cup Flash Point, °C GB/T3536 > 125
Pour Point, °C GB/T3535 < -36
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Request TDS / SDS / COA →

Volatile Blanking & Stamping Oils

Fast- to slow-drying evaporative stamping fluids leaving minimal residue, designed for copper, aluminum and galvanized sheet blanking and shearing.

HF-7035

HF-7035 Fast-Drying Blanking & Shearing Oil

Fast-drying blanking oil from low-viscosity volatile mineral oil with oiliness and rust inhibitors for clean, high-quality sheared surfaces.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T261 >40
Kinematic Viscosity@40°C, cSt GB/T265 1.0-2.0
Corrosion Test, Copper / Steel@50°C, 3h SH/T0195 Grade 1
Request TDS / SDS / COA →
HF-7040

HF-7040 Volatile Blanking & Shearing Oil

Volatile blanking oil from low-viscosity mineral oil with oiliness and rust inhibitors, offering fast evaporation and strong penetration.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T261 >40
Kinematic Viscosity@40°C, cSt GB/T265 1.0-2.0
Corrosion Test, Copper / Steel@50°C, 3h SH/T0195 Grade 1
Request TDS / SDS / COA →
HF-7060

HF-7060 Slow-Drying Volatile Stamping Oil

Slow-drying volatile stamping oil from low-viscosity mineral oil with oiliness and rust inhibitors for controlled evaporation and good surface finish.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T261 >60
Kinematic Viscosity@40°C, cSt GB/T265 1.3-2.0
Corrosion Test, Copper / Steel@50°C, 3h SH/T0195 Grade 1
Request TDS / SDS / COA →
HF-7090

HF-7090 Oil-Film Stamping Oil

Oil-film-forming stamping oil from low-viscosity mineral oil with oiliness and rust inhibitors, leaving a protective lubricating film.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T261 >90
Kinematic Viscosity@40°C, cSt GB/T265 2.0-3.5
Corrosion Test, Copper / Steel@50°C, 3h SH/T0195 Grade 1
Request TDS / SDS / COA →

Heat-Treatment Media

Bright quenching and vacuum quenching oils with controlled cooling curves for induction hardening and vacuum heat treatment of alloy steels.

QK

QK Fast Bright Quenching Oil

Fast bright quenching oil from deeply refined paraffinic base stocks and a proprietary additive package, designed for high-frequency induction hardening.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 15-40
Cleveland Open-Cup Flash Point, °C GB/T3536 > 150
Water Content, %wt GB/T260 Trace
Characteristic Temperature, °C GB/T30823 >= 650
Maximum Cooling Rate, °C/s GB/T30823 >= 80
Cooling Rate@300°C, °C/s GB/T30823 <= 10
Request TDS / SDS / COA →
QZ

QZ Vacuum Quenching Oil

Vacuum quenching oil from narrow-cut, highly refined paraffinic mineral oils compounded with functional additives.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Kinematic Viscosity@100°C, cSt GB/T265 25-35
Cleveland Open-Cup Flash Point, °C GB/T3536 > 200
Water Content, %wt GB/T260 Trace
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 <= 1
Request TDS / SDS / COA →

Vacuum Pump Oils

Low-vapour-pressure vacuum pump fluids for high and low temperature vacuum applications.

High

High/Low-Temperature Vacuum Pump Oil

High/low-temperature vacuum pump oil with low vapour pressure and stable lubricity across wide operating temperature ranges.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 90.0-110.0
Cleveland Open-Cup Flash Point, °C GB/T3536 > 206
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Request TDS / SDS / COA →

Air-Compressor Oils

Mineral, semi-synthetic and fully synthetic compressor lubricants for oil-injected screw, vane and reciprocating compressors across light to heavy duty.

3000

3000 Series Light-to-Medium Duty Air-Compressor Oil

Compressor oil from refined mineral oils and premium additives for oil-injected screw, vane and medium/high-pressure reciprocating compressors.

TDSSDS / MSDS
View verified technical data (6 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 41.4-50.6
Cleveland Open-Cup Flash Point, °C GB/T3536 > 185
Viscosity Index GB/T1995 > 90
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Pour Point (°C) GB/T3535 < -9
Request TDS / SDS / COA →
4000

4000 Series Semi-Synthetic Medium-to-Heavy Duty Air-Compressor Oil

Semi-synthetic compressor oil from highly saturated hydrotreated base stocks and synthetic esters for higher temperature and pressure screw compressors.

TDSSDS / MSDS
View verified technical data (7 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 28.8-35.2
Cleveland Open-Cup Flash Point, °C GB/T3536 > 185
Viscosity Index GB/T1995 > 90
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Pour Point (°C) GB/T3535 < -9
Request TDS / SDS / COA →
6000

6000 Series Fully Synthetic Heavy-Duty Air-Compressor Oil

Fully synthetic heavy-duty compressor oil for oil-injected rotary screw compressors operating under high temperature and high pressure.

TDS
View verified technical data (7 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 28.5-35.2
Cleveland Open-Cup Flash Point, °C GB/T3536 > 220
Viscosity Index GB/T1995 > 120
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Pour Point (°C) GB/T3535 <= -40
Request TDS / SDS / COA →

Neat Cutting Oils

Straight mineral and synthetic ester cutting oils for gear shaving, deep-hole drilling, EDM, lapping, tapping and heavy-duty machining of ferrous and non-ferrous alloys.

EDM-1

EDM-1 Precision EDM Oil

Low-viscosity, low-volatility precision EDM dielectric fluid with excellent cooling and flushing for all electrical-discharge machines.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Colorless clear liquid
Flash Point, °C GB/T3536 >90
Kinematic Viscosity@40°C, cSt GB/T265 1.5-3.5
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Corrosion@100°C, 3h, Copper GB/T391 Grade 1
Request TDS / SDS / COA →
EDM-S

EDM-S Synthetic EDM Oil

Synthetic EDM dielectric fluid with low aromatic content, mild odour and low foaming, purpose-designed for electro-erosion machining.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Colorless clear liquid
Flash Point, °C GB/T3536 > 90
Kinematic Viscosity@40°C, cSt GB/T265 1.5-3.5
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Corrosion@100°C, 3h, Copper GB/T391 Grade 1
Request TDS / SDS / COA →
NC-310

NC-310 Lapping Oil

Neat lapping oil from refined low-viscosity base stocks and functional additives, delivering superior lubricity and EP performance for high-gloss surfaces.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T3536 > 170
Kinematic Viscosity@40°C, cSt GB/T265 10-20
Corrosion@100°C, 3h, Steel SH/T0195 Grade 1
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →
NC-610

NC-610 General-Purpose Precision Cutting Oil

General-purpose precision neat cutting oil from EP lubricants, oiliness agents and refined mineral oil for medium-duty high-speed machining of ferrous and non-ferrous metals.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Appearance Visual Light-yellow clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 10-18
Flash Point, °C GB/T3536 > 160
Corrosion @100°C, 3h Steel GB/T5096
Corrosion @100°C, 3h Copper GB/T5096
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →
NC-620

NC-620 General-Purpose Precision Cutting Oil

General-purpose precision neat cutting oil with EP, oiliness and rust inhibitors for medium-to-high speed heavy cutting, including stainless steels.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T3536 > 160
Kinematic Viscosity@40°C, cSt GB/T265 13-22
Corrosion@100°C, 3h, Copper GB/T5096 Grade 1
Mechanical Impurities, % GB/T511 None
Water Content, % GB/T260 Trace
Request TDS / SDS / COA →
NC-810T

NC-810T Precision Gear Shaving Oil

Precision gear shaving oil from premium base stocks with EP and lubricity additives, engineered for demanding high-lubricity gear machining.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Brown-yellow clear liquid
Flash Point, °C GB/T3536 > 170
Kinematic Viscosity@40°C, cSt GB/T265 10-25
Weld Load (PD), N GB/T3142 >= 4900
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Request TDS / SDS / COA →
NC-810V

NC-810V Deep-Hole Drilling Cutting Oil

Heavy-duty deep-hole drilling oil from multiple EP lubricants, oiliness agents and rust inhibitors with strong lubricity and cooling.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T3536 > 140
Kinematic Viscosity@40°C, cSt GB/T265 14-18
Extreme-Pressure Property-Weld Load (PD), N GB/T3142 > 4900
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →
NC-810

NC-810 Heavy-Duty Cutting Oil

Heavy-duty neat cutting oil with active EP additives, oiliness agents and rust inhibitors for difficult-to-machine hard materials.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Appearance Visual Brown-yellow clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 10-18
Flash Point, °C GB/T3536 > 140
Corrosion@100°C, 3h, Steel SH/T0195 Grade 1
Weld Load (PD), N GB/T3142 > 4900
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →
NC-820

NC-820 Heavy-Duty Cutting Oil

Heavy-duty neat cutting oil with active EP additives, oiliness agents and rust inhibitors for difficult-to-machine hard materials.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T3536 > 160
Kinematic Viscosity@40°C, cSt GB/T265 17-29
Corrosion@100°C, 3h, Steel SH/T0195 Grade 1
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →
NC-920

NC-920 Magnesium-Aluminum Alloy Cutting Oil

Colorless, low-odor, low-mist neat cutting oil for magnesium-aluminum alloys, reducing fire risk during magnesium machining.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T3536 > 170
Kinematic Viscosity@40°C, cSt GB/T265 20-30
Corrosion@100°C, 3h, Copper GB/T5096 Grade 1
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →
NC-V30

NC-V30 Minimum-Quantity Spray Machining Oil

MQL spray machining oil from specialty synthetic esters, EP anti-wear agents, stabilizers and rust inhibitors for minimum-quantity lubrication systems.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt SH/T0298 30-40
Flash Point, °C GB/T3536 > 260
Mechanical Impurities, %wt. GB/T511 None
Water Content, % GB/T260 Trace
Request TDS / SDS / COA →
SC-1

SC-1 Tapping Oil

Mineral-oil-based neat tapping oil with multiple EP lubricity additives, purpose-built for metal press forming and threading.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T261 >180
Kinematic Viscosity@40°C, cSt GB/T265 80-110
Weld Load (PD), N GB/T3142 > 4900
Mechanical Impurities GB/T511 None
Water Content GB/T260 Trace
Request TDS / SDS / COA →
NC-P15

NC-P15 Eco-Friendly Precision Cutting Oil

Eco-friendly precision neat cutting oil from refined mineral oil and premium lubricants for medium-duty machining of moderate-machinability metals.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Flash Point, °C GB/T3536 > 110
Kinematic Viscosity@40°C, cSt GB/T265 5-10
Corrosion @100°C, 3h Steel GB/T5096
Corrosion @100°C, 3h Copper GB/T5096
Mechanical Impurities, %wt GB/T511 None
Water Content, %wt GB/T260 Trace
Request TDS / SDS / COA →

Wire EDM Fluids

Water-soluble wire-cut EDM working fluids and emulsifiable oils providing stable dielectric behaviour, rust protection and fine surface finish.

SW-010

SW-010 Wire EDM Working Fluid

High-efficiency water-soluble wire EDM working fluid from EP lubricants, rust inhibitors and surfactants; free of heavy metals, sodium nitrite and phenols.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Clear liquid
Appearance, 5%wt.Dilution Visual Translucent to clear liquid
pH Value, 5%wt. pH meter 9.5-11.0
Rust Prevention, (Cast Iron, 35°C±2°C, RH>95%; Single Chip24h, Stacked Chips8h) GB/T 6144 Grade A
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
SW-011

SW-011 Wire EDM Emulsified Oil

Premium wire EDM emulsifiable oil with lubricity and rust inhibitors; free of heavy metals, sodium nitrite and phenols.

TDSSDS / MSDSCOA
View verified technical data (10 parameters)
Test Item Test Method Specification
Appearance, Concentrate Visual Brown-red clear liquid
Appearance, 5%wt.Dilution Visual Milky opaque liquid
pH Value, 5%wt. pH meter 9.2-9.6
Emulsion Stability@15-35°C,24h, Soap SH/0365 <= 0.5
Emulsion Stability@15-35°C,24h, Oil SH/0365 None
Emulsion Rust Prevention@35±2°C, Cast Iron Chips, Single Chip, 48h GB/T6144 Grade A
Emulsion Rust Prevention@35±2°C, Cast Iron Chips, Stacked Chips, 8h GB/T6144 Grade A
Emulsion Corrosion Test@55±2°C, Full Immersion, Steel Strip, 24h GB/T6144 Grade 0
Emulsion Corrosion Test@55±2°C, Full Immersion, Copper Strip, 6h GB/T6144 Grade 0
Emulsion Corrosion Test@55±2°C, Full Immersion, Aluminum Strip, 4h GB/T6144 Grade 1
Request TDS / SDS / COA →

Die-Casting Release Agents

Water-based and emulsified die-casting release agents for low- and high-pressure aluminum and zinc alloy casting, including plunger lubricants and covering fluxes.

Low-Pressure

Low-Pressure Aluminum Alloy Release Agent

Low-pressure aluminum alloy die-casting release agent for automotive, electronics, motorcycle and aerospace component casting.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Test Item Specification
Appearance White to light-yellow emulsion
Solid Content, % > 25
pH Value (1:20) 8.0-9.0
Request TDS / SDS / COA →
Zinc

Zinc Alloy Release Agent

Emulsified zinc alloy die-casting release agent widely used for automotive, motorcycle, aerospace and electrical components.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Appearance Visual Amber clear liquid
Appearance, Dilution Visual Opaque emulsion
pH Value, 5%wt. pH meter 7.0-8.0
Solubility@20°C, Tap Water - Fully dissolved within 3 min
Request TDS / SDS / COA →
High-Pressure

High-Pressure Aluminum Alloy Release Agent

High-pressure aluminum alloy die-casting release agent for demanding heavy-duty casting of automotive and electronics components.

TDSSDS / MSDSCOA
View verified technical data (4 parameters)
Test Item Test Method Specification
Test Item Specification
Appearance Milky white liquid
Stability No separation after 48 h at 1:100 dilution
Solubility Fully soluble
Request TDS / SDS / COA →

Rust-Preventive Oils & Inhibitors

Solvent-based, water-soluble and wax-film rust preventives for inter-process, transit and long-term storage protection of ferrous and non-ferrous metals.

P-100V

P-100V Water-Soluble Rust Preventive

Water-soluble high-efficiency rust inhibitor for in-process, semi-finished and finished ferrous part protection during manufacturing and maintenance.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Appearance Visual Colorless, clear
pH Value, 5%wt. pH meter 9.2-9.6
1:40DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (45# Steel, 55±2°CFull Immersion, 168h) GB/T 6144 Pass
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
P-141

P-141 Highly Concentrated Water-Soluble Rust Preventive

Highly concentrated water-soluble rust inhibitor from long-chain polycarboxylic acids and organic amines; phosphorus- and boron-free.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Brown translucent to clear
Dilution Appearance, 5%wt. Visual Clear
pH Value, 5%wt. pH meter 8.5-9.5
Rust Prevention (Cast Iron Chips, 2%wt, 18-25°C, 2h) JB/T9189-2010 Grade 0, no rust
Corrosion (45# Steel, 55±2°CFull Immersion, 168h) GB/T 6144 Pass
Nitrite, mg/L Nitrite test strip None
Request TDS / SDS / COA →
P-40

P-40 Ultra-Thin Rust-Preventive Oil

Volatile ultra-thin soft-film rust preventive with low odour, good water displacement and strong salt-spray barrier performance.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 3-7
Flash Point (Open Cup), °C GB/T3536 >70
Drying Performance SH/T 0063 Oily
Rust Prevention (Salt-Spray Test), 45# Steel, 12h SH/T0081 Pass
Request TDS / SDS / COA →
P-901

P-901 Soft-Film Rust-Preventive Oil

Soft-film rust preventive that displaces fingerprints and water vapour; thin, transparent, low-odour film for ferrous and non-ferrous metals.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Brown-yellow clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 27-40
Flash Point, °C GB/T3536 >170
Base-Oil Stability@52°C, 72h - Pass
Rust Prevention (Salt-Spray Test), 45# Steel, 24h SH/T0081 Pass
Corrosion Test@100±2°C, 3h, Copper GB/T5096 Grade 1
Request TDS / SDS / COA →
P-902

P-902 Soft-Film Rust-Preventive Oil

Soft-film rust preventive with hand-sweat and water-vapour displacement; thin, transparent, low-odour protective film.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Brown-yellow clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 30-40
Flash Point, °C GB/T3536 >170
Base-Oil Stability@52°C, 72h - Pass
Rust Prevention (Salt-Spray Test), 45# Steel, 24h SH/T0081 Pass
Corrosion Test@100±2°C, 3h, Copper GB/T5096 Grade 1
Request TDS / SDS / COA →
P-903

P-903 Fast-Drying Rust-Preventive Oil

Fast-drying rust preventive based on light distillate and multiple rust inhibitors for applications requiring rapid dry-to-touch.

TDSSDS / MSDSCOA
View verified technical data (5 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 1.0-3.0
Flash Point (Open Cup), °C GB/T 261 >40
Corrosion Test (Copper, 50°C, 3h), ≤2Grade GB/T 5096 Pass
Salt-Spray Test (45# Steel Panel), >12h SH/T 0081 Pass
Request TDS / SDS / COA →
P-904

P-904 Water-Displacement Rust-Preventive Oil

Water-displacing rust preventive with dehydrating agents for inter-process protection of machined steel parts; strips residual water film.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 2.0-4.0
Flash Point (Open Cup), °C GB/T 261 >70
Drying Performance SH/T 0063 Oily
Corrosion Test (Copper, 100°C, 3h), ≤2Grade GB/T 5096 Pass
Salt-Spray Test (45# Steel Panel), >12h SH/T0081 Pass
Request TDS / SDS / COA →
P-906

P-906 Long-Term Storage Wax-Film Rust-Preventive Oil

Long-term wax-film rust preventive from petroleum solvent, wax and inhibitors with outstanding salt-spray and humidity resistance for storage sealing.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Colour Visual Light brown-yellow liquid
Flash Point, °C GB/T3536 > 40
Drying Performance SH/T0063 Waxy film
Low-Temperature Adhesion SH/T0211 Pass
Water Displacement SH/T0036 Pass
Rust Prevention (Humidity), h GB/T2361 >= 168
Rust Prevention (Salt Spray), h SH/T0081 > 48
Request TDS / SDS / COA →
P-907

P-907 Hard-Film Rust-Preventive Oil (Golden Yellow)

Golden-yellow resin-based hard-film rust preventive forming a durable protective coating on metal surfaces.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Brown-yellow clear liquid
Drying Performance SH/T0063 Hard film
Sprayability SH/T0216 Continuous film
Separation Stability SH/T0214 No phase change, no separation
Water Content, %wt. GB/T 260 None
Salt-Spray Test (45# Steel Panel), >24h SH/T0081 Pass
Request TDS / SDS / COA →
P-9900

P-9900 Hard-Film Rust-Preventive Oil (Golden Yellow)

Golden-yellow resin-based hard-film rust preventive that rapidly forms a tough, visible protective film on metal surfaces.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Red-brown translucent to clear liquid
Drying Performance SH/T0063 Hard film
Sprayability SH/T0216 Continuous film
Separation Stability SH/T0214 No phase change, no separation
Water Content, %wt. GB/T 260 None
Salt-Spray Test (45# Steel Panel), >24h SH/T0081 Pass
Request TDS / SDS / COA →

Minimum-Quantity Lubrication (MQL) Oils

NEW SERIES — High-lubricity synthetic ester and mineral MQL fluids for near-dry machining, with low misting, low smoke and chlorine-free formulations.

KXD-1102NEW 2026

KXD-1102 Minimum-Quantity Lubrication (MQL) Oil

Chlorine-free MQL fluid based on high-lubricity synthetic esters; non-toxic with excellent anti-misting and lubricity for near-dry machining.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T0265 20-30
Flash Point, °C GB/T3536 > 200
Copper Corrosion (Copper, 100°C, 3h) GB/T5096 Grade A
Mechanical Impurities, %wt. GB/T511 None
Water Content, % GB/T260 Trace
Request TDS / SDS / COA →
KXD-1103NEW 2026

KXD-1103 Minimum-Quantity Lubrication (MQL) Oil

Chlorine-free MQL fluid based on high-lubricity synthetic esters; non-toxic with excellent anti-misting and lubricity for near-dry machining.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T0265 10-20
Flash Point, °C GB/T3536 > 200
Copper Corrosion (Copper, 100°C, 3h) GB/T5096 Grade A
Mechanical Impurities, %wt. GB/T511 None
Water Content, % GB/T260 Trace
Request TDS / SDS / COA →
NM-25NEW 2026

NM-25 Minimum-Quantity Lubrication (MQL) Oil

MQL fluid from refined mineral oil and EP anti-wear additives, delivering effective lubrication and cooling with minimum-quantity lubrication equipment.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T0265 20-30
Flash Point, °C GB/T3536 > 200
Copper Corrosion (Copper, 100°C, 3h) GB/T5096 Grade A
Mechanical Impurities, %wt. GB/T511 None
Water Content, % GB/T260 Trace
Request TDS / SDS / COA →

Bio-Based & Biodegradable Fluids

NEW SERIES — Plant-derived ester cutting fluids, semi-synthetic coolants and biodegradable hydraulic oils formulated for high renewability and low ecotoxicity.

46NEW 2026

46 Bio-Based Biodegradable Hydraulic Oil

Ashless zinc-free biodegradable hydraulic oil based on plant-derived fatty acid esters blended in optimized ratios for high renewability.

TDSSDS / MSDS
View verified technical data (8 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
Kinematic Viscosity@40°C, cSt GB/T265 41.4-50.6
Viscosity Index GB/T1995 >= 180
Cleveland Open-Cup Flash Point, °C GB/T267 >= 270
Pour Point, °C GB/T3535 <= -24
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Biodegradability, % OECD 301B >= 65
Request TDS / SDS / COA →
F8NEW 2026

F8 Bio-Based Semi-Synthetic Cutting Fluid

Bio-based semi-synthetic cutting fluid from plant ester base stocks with a synergistic polycarboxylic rust-inhibitor and specialty amine neutralization system; boron-free.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Concentrate Appearance Visual Clear liquid
pH Value, 5%wt. pH meter 8.5-9.5
5%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (55°C±2°C), h LY12 aluminum GB/T6144
Corrosion (55°C±2°C), h Copper GB/T6144
Biodegradability, % OECD 301B >= 60
Request TDS / SDS / COA →
NC-E20NEW 2026

NC-E20 Bio-Based Ester-Blend Cutting Oil

New-generation eco-friendly plant-based neat cutting oil from biodegradable synthetic esters with EP, antioxidant and rust-inhibitor additives.

TDSSDS / MSDS
View verified technical data (8 parameters)
Test Item Test Method Specification
Appearance Visual Clear
Kinematic Viscosity@40°C, cSt GB/T265 10-20
Cleveland Open-Cup Flash Point, °C GB/T3536 >= 200
Weld Load (PD), N GB/T3142 >= 3920
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Biodegradability, % OECD 301B >= 60
Request TDS / SDS / COA →

Eco-Friendly Cutting Fluids

NEW SERIES — Bio-stable semi-synthetic emulsions built on synthetic ester lubrication for long sump life with reduced environmental impact.

EC-S100NEW 2026

EC-S100 Eco-Friendly Cutting Fluid

Bio-stable semi-synthetic general-purpose water-miscible metalworking fluid built on premium fatty acid ester lubrication for extended sump life.

TDSSDS / MSDSCOA
View verified technical data (7 parameters)
Test Item Test Method Specification
Appearance Visual Clear liquid
pH Value, 5%wt. pH meter 8.5-9.5
5%DilutionRust Prevention (18-28°C, 2h, Cast Iron Chips) JB/T9189-2016 Grade 0, no rust
Corrosion (55°C±2°C), h Cast iron GB/T6144
Corrosion (55°C±2°C), h Copper GB/T6144
Corrosion (55°C±2°C), h LY12 aluminum GB/T6144
Foam Tendency, Distilled Water GB/T 6144 Foam <= 2 mL after 10 min
Request TDS / SDS / COA →

High-Temperature Chain Oils

NEW SERIES — Synthetic ester chain lubricants for continuous high-temperature conveying and oven chains, resisting volatilisation, coking and dripping.

220#NEW 2026

220# High-Temperature Chain Oil

High-temperature chain oil from deeply refined base stocks and specialty additives for chains operating continuously up to 230 °C.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 198-242
Cleveland Open-Cup Flash Point, °C GB/T3536 > 230
Pour Point GB/T3535 < -10
Steel Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Request TDS / SDS / COA →
CK22NEW 2026

CK22 High-Temperature Chain Oil

Synthetic high-temperature chain oil from premium synthetic esters with low volatility, no carbon build-up and no dripping.

TDSSDS / MSDSCOA
View verified technical data (6 parameters)
Test Item Test Method Specification
Kinematic Viscosity@40°C, cSt GB/T265 180-220
Viscosity Index GB/T1995 > 150
Cleveland Open-Cup Flash Point, °C GB/T3536 > 300
Water Content, %wt GB/T260 Trace
Mechanical Impurities, %wt GB/T511 None
Copper Strip Corrosion (100°C, 3h), Grade GB/T5096 Grade 1
Request TDS / SDS / COA →

Need the full document set or a custom formulation?

Request the complete TDS, SDS and factory inspection report for any model, or ask our Guangzhou and Huizhou R&D laboratories about custom additive synthesis, viscosity tailoring and alloy-specific corrosion testing.

Contact Technical Engineering Team →

Technical values shown are typical specification ranges from FanChu product data sheets and are provided for reference. Batch-specific certified values are issued with each COA. Guangzhou FanChu Lubricant Technology · ISO 9001 / ISO 14001 / ISO 45001 · Since 2005.